Knife Blade Basic (C)
Knife blade in carbon steel, 94 mm blade, Scandi grind
The polished knife blade is made from German carbon steel, C100S - a high-quality knife steel from the steel producer. Combined with expertise in hardening and metallurgical knowledge, results in a blade with a balanced combination of hardness, toughness, and edge retention. Please note that carbon steel is prone to rust, so it's best to wipe and oil the knife blade after use.
The knife blade undergoes a rigorous manufacturing process that has been refined over 130 years at the knife factory in Mora. Morakniv’s goal is to achieve the ideal balance between optimal sharpness and edge retention. The knife blade is heat-treated by first being heated to over seven hundred degrees, then rapidly cooled to room temperature in a very short time. Finally, the blade is tempered at several hundred degrees to maximize the steel's performance. After this heat treatment, the knife blade achieves a hardness of 58.5 HRC.
The knife blade is side-ground under meticulous control, followed by precision sharpening of the edge, where the knife receives its Scandi grind through the honing phase. Finally, the knife blade is polished in two steps, a rough polish followed by a fine polish. Since the knife spine is not compatible with a fire starter, it is left unprocessed, with visible traces from the stamping stage.
Each component is meticulously developed and crafted with masterful quality by skilled craftsmen at the Morakniv knife factory in Mora, Sweden.
Knife length: 174.0 mm / 6.85 inch
Blade length: mm / 3.7 inch
Product length: 174.0 mm / 6.85 inch
Blade thickness: 2.0 mm / 0.08 inch
Weight: 32.0 g / 1.13 oz
Nominal hardness (HRC): 58,5
Grinding:Scandi
Grinding angle (total): 24
Edge angle: 39
Type of Tang: Morakniv standard pliers
Grip Handle Color: -
Flex: Stiff
Country of Origin: Sweden
Brand: Morakniv
Type: Knife blade
Knife blades
Universal knife with superior sharpness for optimal performance.
Scandi grind sharpening that keeps the edge sharp for a long time.
Made in Mora, Sweden.
Standard bar
German carbon steel 100
58,5 HRC
Scandi Grind
Length 94 mm, thickness 2 mm
Our products are intended for hobby and professional use in the kitchen, outdoors, hunting, crafts, handicrafts, etc. Please read these instructions carefully before use. Incorrect use may result in injury.
Instructions for use and safety information
Knife Blade Basic (C)
The polished knife blade is made from German carbon steel, C100S - a high-quality knife steel from the steel producer. Combined with expertise in hardening and metallurgical knowledge, results in a blade with a balanced combination of hardness, toughness, and edge retention. Please note that carbon steel is prone to rust, so it's best to wipe and oil the knife blade after use.
The knife blade undergoes a rigorous manufacturing process that has been refined over 130 years at the knife factory in Mora. Morakniv’s goal is to achieve the ideal balance between optimal sharpness and edge retention. The knife blade is heat-treated by first being heated to over seven hundred degrees, then rapidly cooled to room temperature in a very short time. Finally, the blade is tempered at several hundred degrees to maximize the steel's performance. After this heat treatment, the knife blade achieves a hardness of 58.5 HRC.
The knife blade is side-ground under meticulous control, followed by precision sharpening of the edge, where the knife receives its Scandi grind through the honing phase. Finally, the knife blade is polished in two steps, a rough polish followed by a fine polish. Since the knife spine is not compatible with a fire starter, it is left unprocessed, with visible traces from the stamping stage.
Each component is meticulously developed and crafted with masterful quality by skilled craftsmen at the Morakniv knife factory in Mora, Sweden.