The 9 cm polished blade is made from German carbon steel, C100S - a high-quality knife steel that, combined with expertise in hardening and metallurgical knowledge, results in a blade with a balanced combination of hardness, toughness, and edge retention. Please note that carbon steel is prone to rust, so it's best to wipe and oil the blade after use.

The knife blade undergoes a rigorous manufacturing process that has been refined over 130 years at the knife factory in Mora. Morakniv’s goal is to achieve the ideal balance between optimal sharpness and edge retention. The knife blade is heat-treated by first being heated to over seven hundred degrees, then rapidly cooled to room temperature in a very short time. Finally, the blade is tempered at several hundred degrees to maximize the steel's performance. After this heat treatment, the knife blade achieves a hardness of 58.5 HRC.
The knife blade is side-ground under meticulous control, followed by precision sharpening of the edge, where the knife receives its Scandi grind through the honing phase. Finally, the blade is polished in two steps, a rough polish followed by a fine polish. Since the knife spine is not compatible with a fire starter, it is left unprocessed, with visible traces from the stamping stage. The blade is now ready for handle attachment, which is done using fully automated injection molding machines.

The ergonomic handle, made from high-quality polymer, is injection molded in three layers onto the knife tang, making the final knife construction robust and durable. Simultaneously, the knife sheaths are produced in parallel with the knives in the same fully automated robotic cell, ensuring a perfect match in both color and form.

The knife sheath features a practical button adorned with the coat of arms of Dalarna in the shape of a shield, serving as a historical guarantee of quality and craftsmanship. During the same injection molding process, the sheath is equipped with an integrated belt clip, which allows for attachment to a tool button on workwear, a belt or to be connected with another Morakniv.

Each component is meticulously developed and crafted with masterful quality by skilled craftsmen at the Morakniv knife factory in Mora, Sweden.

Knife length: 206.0 mm / 8.11 inch
Blade length: 91.0 mm / 3.58 inch
Product length: 224.0 mm / 8.82 inch
Blade thickness: 2.0 mm / 0.08 inch
Weight: 109.5 g / 3.86 oz

Steel type: Carbon steel
Nominal hardness (HRC): 58,5
Grinding:Scandi
Grinding angle (total): 24
Edge angle: 39
Type of Tang: Morakniv standard pliers
Finger Guard: Yes
Sheath Included: Yes
Grip Handle Color: Red
Sheath Orientation: Right
Sheath Color: Blue
Handle Grip material: Polypropylene
Flex: Stiff
Country of Origin: Sweden
Brand: Morakniv
Type: Knife
Color: Blue,Red
Area of Use: Work/Construction
Sheath Material: Polypropylene

Craft knife
Polymer handle (PP)
Ergonomic grip
Finger guard
Polymer sheath

Standard bar
German carbon steel 100
58,5 HRC
Scandi Grind
Length 91 mm, thickness 2 mm

Our products are intended for hobby and professional use in the kitchen, outdoors, hunting, crafts, handicrafts, etc. Please read these instructions carefully before use. Incorrect use may result in injury.

Instructions for use and safety information

About the product

Basic 511 Color of the Year 2025 (C) Siljan Blue/Dala Red™

The 9 cm polished blade is made from German carbon steel, C100S - a high-quality knife steel that, combined with expertise in hardening and metallurgical knowledge, results in a blade with a balanced combination of hardness, toughness, and edge retention. Please note that carbon steel is prone to rust, so it's best to wipe and oil the blade after use.

The knife blade undergoes a rigorous manufacturing process that has been refined over 130 years at the knife factory in Mora. Morakniv’s goal is to achieve the ideal balance between optimal sharpness and edge retention. The knife blade is heat-treated by first being heated to over seven hundred degrees, then rapidly cooled to room temperature in a very short time. Finally, the blade is tempered at several hundred degrees to maximize the steel's performance. After this heat treatment, the knife blade achieves a hardness of 58.5 HRC.
The knife blade is side-ground under meticulous control, followed by precision sharpening of the edge, where the knife receives its Scandi grind through the honing phase. Finally, the blade is polished in two steps, a rough polish followed by a fine polish. Since the knife spine is not compatible with a fire starter, it is left unprocessed, with visible traces from the stamping stage. The blade is now ready for handle attachment, which is done using fully automated injection molding machines.

The ergonomic handle, made from high-quality polymer, is injection molded in three layers onto the knife tang, making the final knife construction robust and durable. Simultaneously, the knife sheaths are produced in parallel with the knives in the same fully automated robotic cell, ensuring a perfect match in both color and form.

The knife sheath features a practical button adorned with the coat of arms of Dalarna in the shape of a shield, serving as a historical guarantee of quality and craftsmanship. During the same injection molding process, the sheath is equipped with an integrated belt clip, which allows for attachment to a tool button on workwear, a belt or to be connected with another Morakniv.

Each component is meticulously developed and crafted with masterful quality by skilled craftsmen at the Morakniv knife factory in Mora, Sweden.

KNIFE MATERIAL

We make our knives from carefully selected materials from Swedish and European suppliers.
Here is a selection of materials for this knife.

stem
polymer
knifemakers_block_photo.jpg
sigill-knifemakers-green.jpg