KNIFE MATERIAL
Woodcarving Knife 120 (LC)
289 kr
Whittling knife, LC steel and short blade for fine carving
Available in stockHurry up! Limited quantityOut of stock
Product is not available
The Woodcarving Knife 120 (LC) is a whittling knife with a 62 mm laminated carbon steel blade. The short, pointed blade is perfect for fine carving and precise cuts in wood.
The Knife
Carving knife
Shaft in linseed oiled birch
Spool shaped shaft
Knife length 170 mm
Plastic knife case
Shaft in linseed oiled birch
Spool shaped shaft
Knife length 170 mm
Plastic knife case
The Blade
Full knitting needle
French laminated carbon steel 100CR6
58.5 HRC
Polished blade with lamination
Length 62 mm, thickness 2.7 mm
French laminated carbon steel 100CR6
58.5 HRC
Polished blade with lamination
Length 62 mm, thickness 2.7 mm
The Woodcarving Knife 120 (LC) is a classic whittling knife with a 62 mm laminated carbon steel blade. The short, pointed blade offers good precision for fine carving and detailed work. The barrel-shaped handle in oiled birch sits comfortably in the hand and provides control with every cut.
A carving classic – the perfect basic knife
The Woodcarving Knife 120 (LC) is a trusted basic knife among both beginners and experienced carvers. The shorter blade combined with the comfortable handle makes it a reliable tool for woodwork where precision matters.
Short blade for fine carving
The 62 mm long, narrow, and pointed blade makes the knife ideal for fine carving and precise cuts. The full rat-tail tang running through the handle ensures good stability and strength.
Comfortable birch handle with good control
The barrel-shaped handle in oiled Scandinavian birch is designed to sit well in the hand, even during extended use. The knife comes with a plastic sheath.
Laminated carbon steel that withstands lateral pressure
The blade is 2.7 mm thick and made from French laminated carbon steel (100CR6). A carbon steel core is surrounded by softer steel, giving the knife excellent edge retention and toughness to handle lateral stress. The blade reaches a hardness of 58.5 HRC and has a polished surface that protects against rust, but should always be wiped and oiled after use.
Made in Mora, Sweden
The knife is assembled and heat-treated at our factory in Mora with over 130 years of knife-making tradition.
Knife length: 170.0 mm / 6.69 inch
Blade length: 62.0 mm / 2.44 inch
Product length: 230.0 mm / 9.06 inch
Blade thickness: mm / 0.11 inch
Weight: 71.0 g / 2.5 oz
Steel type: Laminated carbon steel
Nominal hardness (HRC): 58,5
Grinding:Scandi Zero
Grinding angle (total): 28
Edge angle: 28
Type of Tang: Piercing pliers
Sheath Included: Yes
Grip Handle Color: Natural
Sheath Orientation: Double
Sheath Color: Black
Handle Grip material: Birch wood
Flex: Stiff
Spine Grind: Yes
Country of Origin: Sweden
Type: Knife
Color: Natural
Area of Use: Carving
Sheath Material: Polypropylene
Nominal hardness (HRC): 58,5
Grinding:Scandi Zero
Grinding angle (total): 28
Edge angle: 28
Type of Tang: Piercing pliers
Sheath Included: Yes
Grip Handle Color: Natural
Sheath Orientation: Double
Sheath Color: Black
Handle Grip material: Birch wood
Flex: Stiff
Spine Grind: Yes
Country of Origin: Sweden
Type: Knife
Color: Natural
Area of Use: Carving
Sheath Material: Polypropylene
Woodcarving knife
Linseed oiled birch handle
Barrel-shaped handle
Knife length 170 mm
Plastic sheath
Full rat-tail tang
French laminated carbon steel 100CR6
58,5 HRC
Polished, laminated blade
Length 62 mm, thickness 2.7 mm
Our products are intended for hobby and professional use in the kitchen, outdoors, hunting, crafts, handicrafts, etc. Please read these instructions carefully before use. Incorrect use may result in injury.
Instructions for use and safety information
About the product
Woodcarving Knife 120 (LC)
The Woodcarving Knife 120 (LC) is a classic whittling knife with a 62 mm laminated carbon steel blade. The short, pointed blade offers good precision for fine carving and detailed work. The barrel-shaped handle in oiled birch sits comfortably in the hand and provides control with every cut.
A carving classic – the perfect basic knife
The Woodcarving Knife 120 (LC) is a trusted basic knife among both beginners and experienced carvers. The shorter blade combined with the comfortable handle makes it a reliable tool for woodwork where precision matters.
Short blade for fine carving
The 62 mm long, narrow, and pointed blade makes the knife ideal for fine carving and precise cuts. The full rat-tail tang running through the handle ensures good stability and strength.
Comfortable birch handle with good control
The barrel-shaped handle in oiled Scandinavian birch is designed to sit well in the hand, even during extended use. The knife comes with a plastic sheath.
Laminated carbon steel that withstands lateral pressure
The blade is 2.7 mm thick and made from French laminated carbon steel (100CR6). A carbon steel core is surrounded by softer steel, giving the knife excellent edge retention and toughness to handle lateral stress. The blade reaches a hardness of 58.5 HRC and has a polished surface that protects against rust, but should always be wiped and oiled after use.
Made in Mora, Sweden
The knife is assembled and heat-treated at our factory in Mora with over 130 years of knife-making tradition.
Apprieu / France
Steel
Sweden
birch
Knottingley / United Kingdom
Linseed oil
This knife
is made in Mora, Sweden.
is made in Mora, Sweden.
Morakniv has been used for carving and woodworking since its inception, and in the 1950s the first specialized woodworking knives were introduced. Today, our carving knives are used all over the world - a range that includes everything from classic carving knives and the Nusnäs knife for Dala horses to spoon and buckle knives. All made in Mora, designed to become an extension of the hand and bring the wood to life.
All carving knives are assembled by hand by our knife makers in Mora - a tradition since 1891.
