KNIFE MATERIAL
Woodcarving Knife 122 (LC)
339 kr
Whittling knife, LC steel and straight edge for chip carving
Available in stockHurry up! Limited quantityOut of stock
Product is not available
The Woodcarving Knife 122 (LC) is a whittling knife with a 62 mm laminated carbon steel blade. Its pointed shape with a straight edge makes it suitable for chip carving and detailed woodwork.
The Knife
Carving knife
Shaft in linseed oiled birch
Spool shaped shaft
Knife length 171 mm
Plastic knife case
Shaft in linseed oiled birch
Spool shaped shaft
Knife length 171 mm
Plastic knife case
The Blade
Full knitting needle
French laminated carbon steel 100CR6
58.5 HRC
Straight edge, polished blade with lamination
Length 62 mm, thickness 2.7 mm
French laminated carbon steel 100CR6
58.5 HRC
Straight edge, polished blade with lamination
Length 62 mm, thickness 2.7 mm
The Woodcarving Knife 122 (LC) is a whittling knife with a 62 mm laminated carbon steel blade. The straight, narrow, and pointed blade shape makes it suitable for chip carving and detailed woodwork. The barrel-shaped handle in oiled birch provides a comfortable grip and good precision.
Wood carving knife for chip carving and fine detailing
The Woodcarving Knife 122 (LC) is designed for detailed carving and well suited for chip carving thanks to its narrow, pointed 62 mm blade with a straight edge. The full rat-tail tang and laminated carbon steel give the knife strength, flexibility, and long-lasting sharpness, while the Scandinavian birch handle sits comfortably in the hand.
Straight edge for decorative cuts
Since the edge is positioned along the straight side of the blade, this model is well suited for chip carving where you cut decorative patterns and details into wood. The full tang that runs through the handle adds strength, while the tapered blade shape offers precision.
Comfortable birch handle
The barrel-shaped handle in oiled Scandinavian birch is designed for comfort, even during longer carving sessions. The knife comes with a plastic sheath.
Tough carbon steel for control and durability
The 2.7 mm thick blade is made from French laminated carbon steel (100CR6), with a carbon steel core surrounded by softer steel. This gives the knife excellent edge retention and the toughness to withstand lateral pressure. The blade reaches a hardness of 58.5 HRC and has a polished finish that protects against rust, but should always be wiped and oiled after use.
Made in Mora, Sweden
The knife is assembled and heat-treated at our factory in Mora with over 130 years of knife-making tradition.
Knife length: 171.0 mm / 6.73 inch
Blade length: 62.0 mm / 2.44 inch
Product length: 230.0 mm / 9.06 inch
Blade thickness: mm / 0.11 inch
Weight: 64.3 g / 2.27 oz
Steel type: Laminated carbon steel
Nominal hardness (HRC): 58,5
Grinding:Scandi Zero
Grinding angle (total): 28
Edge angle: 28
Type of Tang: Piercing pliers
Sheath Included: Yes
Grip Handle Color: Natural
Sheath Orientation: Double
Sheath Color: Black
Handle Grip material: Birch wood
Flex: Stiff
Spine Grind: Yes
Country of Origin: Sweden
Brand: Morakniv
Type: Knife
Color: Natural
Area of Use: Carving
Sheath Material: Polypropylene
Nominal hardness (HRC): 58,5
Grinding:Scandi Zero
Grinding angle (total): 28
Edge angle: 28
Type of Tang: Piercing pliers
Sheath Included: Yes
Grip Handle Color: Natural
Sheath Orientation: Double
Sheath Color: Black
Handle Grip material: Birch wood
Flex: Stiff
Spine Grind: Yes
Country of Origin: Sweden
Brand: Morakniv
Type: Knife
Color: Natural
Area of Use: Carving
Sheath Material: Polypropylene
Woodcarving knife
Linseed oiled birch handle
Barrel-shaped handle
Knife length 171 mm
Plastic sheath
Full rat-tail tang
French laminated carbon steel 100CR6
58.5 HRC
Straight edge, polished laminated blade
Length 62 mm, thickness 2.7 mm
Our products are intended for hobby and professional use in the kitchen, outdoors, hunting, crafts, handicrafts, etc. Please read these instructions carefully before use. Incorrect use may result in injury.
Instructions for use and safety information
About the product
Woodcarving Knife 122 (LC)
The Woodcarving Knife 122 (LC) is a whittling knife with a 62 mm laminated carbon steel blade. The straight, narrow, and pointed blade shape makes it suitable for chip carving and detailed woodwork. The barrel-shaped handle in oiled birch provides a comfortable grip and good precision.
Wood carving knife for chip carving and fine detailing
The Woodcarving Knife 122 (LC) is designed for detailed carving and well suited for chip carving thanks to its narrow, pointed 62 mm blade with a straight edge. The full rat-tail tang and laminated carbon steel give the knife strength, flexibility, and long-lasting sharpness, while the Scandinavian birch handle sits comfortably in the hand.
Straight edge for decorative cuts
Since the edge is positioned along the straight side of the blade, this model is well suited for chip carving where you cut decorative patterns and details into wood. The full tang that runs through the handle adds strength, while the tapered blade shape offers precision.
Comfortable birch handle
The barrel-shaped handle in oiled Scandinavian birch is designed for comfort, even during longer carving sessions. The knife comes with a plastic sheath.
Tough carbon steel for control and durability
The 2.7 mm thick blade is made from French laminated carbon steel (100CR6), with a carbon steel core surrounded by softer steel. This gives the knife excellent edge retention and the toughness to withstand lateral pressure. The blade reaches a hardness of 58.5 HRC and has a polished finish that protects against rust, but should always be wiped and oiled after use.
Made in Mora, Sweden
The knife is assembled and heat-treated at our factory in Mora with over 130 years of knife-making tradition.
Apprieu / France
Steel
Sweden
birch
Knottingley / United Kingdom
Linseed oil
This knife
is made in Mora, Sweden.
is made in Mora, Sweden.
Morakniv has been used for carving and woodworking since its inception, and in the 1950s the first specialized woodworking knives were introduced. Today, our carving knives are used all over the world - a range that includes everything from classic carving knives and the Nusnäs knife for Dala horses to spoon and buckle knives. All made in Mora, designed to become an extension of the hand and bring the wood to life.
All carving knives are assembled by hand by our knife makers in Mora - a tradition since 1891.
